Welcome to the official website of Hebei Beiteer Hydraumatic Equipment Co., Ltd.
Hydraulic Hose 4SP
keyword:
Classification:
Products Details
Whether the selection of hydraulic oil pipe joints is suitable or not has a great influence on the whole machine. If the selected joints are not suitable, it may affect the daily use, and there may be some potential safety hazards. When selecting joints, it is necessary to Match the extra working pressure and the self-excluded pressure, so that the selected joint will be suitable, so as to avoid affecting the normal use of the machine during the working process. Generally speaking, the inner diameter of hydraulic oil pipe joints is between 5-7.5m/s, and the maximum inner diameter cannot exceed 10m/s. According to this range, the inner diameter of the hose can be determined, and it can also be used as a reference when selecting. If the clear operation is guaranteed to be unobstructed, the total length of the high-pressure hose will continue to shrink, and the maximum limit cannot exceed 30m. A single rubber hose should choose some slightly longer joints, but the length of a single piece should not be less than 5m, otherwise it will affect the normal use of the joint. Because the high-pressure hose joint meets the mechanical strength, the flow area and shape will be the same as the rubber hose. At this time, you can choose the high-speed joint to avoid some influence.
Hydraulic joints are divided into high pressure ball valves, ferrule type tee joints, hydraulic hoses, high pressure hoses, etc. Hydraulic fittings are a very commonly used item. For their own marketing, the key points of use are its oil pipe fitting rules and its standards. This is a problem that customers are most concerned about. Because the impact force of the high-pressure oil pipe is still very large, it cannot be replaced with a general connector, so the all-round working pressure of the hydraulic press is still very large. Generally speaking, it cannot exceed 0.5 standard at most. No way. If you want to choose a regular hydraulic joint, you must pay attention to choosing a regular organization. Generally speaking, the products made by the regular organization meet the relevant standards and will not produce inferior products.
Related Products
Six Layers of Inner Peeling Glue 87693
Metric 24 Degree Taper Weight Series 20512-RW
Inquiry Now
QUICK CONTACT
T.: +86 15030876668 (Mr. Meng)
T.: +86 15833286698 (Mr. Liang)
F.: +86 0318-4506555
E-mail: xueqing@beiteer-joint.com
WhatsApp: +86 15030876668
Facebook: +86 15030876668
Add.: No. 337 Guangchuan Street, Jingxian West Development Zone, Hebei Province, China
