Welcome to the official website of Hebei Beiteer Hydraumatic Equipment Co., Ltd.
Metric 24 Degree Cone Light Series 20441
keyword:
Classification:
Products Details
Hydraulic joints are divided into high pressure ball valves, ferrule type tee joints, hydraulic hoses, high pressure hoses, etc. Hydraulic fittings are a very commonly used item. For their own marketing, the key points of use are its oil pipe fitting rules and its standards. This is a problem that customers are most concerned about. Because the impact force of the high-pressure oil pipe is still very large, it cannot be replaced with a general connector, so the all-round working pressure of the hydraulic press is still very large. Generally speaking, it cannot exceed 0.5 standard at most. No way. If you want to choose a regular hydraulic joint, you must pay attention to choosing a regular organization. Generally speaking, the products made by the regular organization meet the relevant standards and will not produce inferior products.
The transition joint is used for the connection between different pipes, but as it is more and more widely used, there are more and more different forms of transition joints, such as copper and aluminum in material and functional. Hydraulic, there are also four common forms in the same form, today I will give you a detailed introduction. The form of a corner bend is the same as its name. This transition joint is to make the front part into a right angle, which can connect two pipes on different planes, such as water pipes in the corners and other places often need to use this transition joint . The vertical water pipes can be developed horizontally, which saves space and is more convenient. Form 2 straight-through type This is the most common and simplest type of joint. It is similar to a pipe. It connects the two ends that are not connected, but it is still in a horizontal state and does not change the direction of some pipes. As the name implies, this type of joint has three joints in different directions, which can connect pipes from three directions. Generally, these three directions are perpendicular to each other, just like a corner model. It is also widely used in life. This model has one more joint than the three-way type, just like a crossroad connecting four different directions. In life, objects in four different directions can be connected together, giving full play to the transition joint connection. function of the item.
Related Products
Six Layers of Inner Peeling Glue 87693
Metric 24 Degree Taper Weight Series 20512-RW
Inquiry Now
QUICK CONTACT
T.: +86 15030876668 (Mr. Meng)
T.: +86 15833286698 (Mr. Liang)
F.: +86 0318-4506555
E-mail: xueqing@beiteer-joint.com
WhatsApp: +86 15030876668
Facebook: +86 15030876668
Add.: No. 337 Guangchuan Street, Jingxian West Development Zone, Hebei Province, China
