Welcome to the official website of Hebei Beiteer Hydraumatic Equipment Co., Ltd.
SAE Flange Light Series 87392-16
keyword:
Classification:
Products Details
The nominal diameter of the high-pressure hose specification rubber hose should be moderate. A small pipe will increase the water flow of the material in the pipeline, make the system software hot, reduce the efficiency, and cause excessive gas pressure, which will endanger the characteristics of the entire system software. When the hose is fixed with a pipe clamp or the rubber hose passes over the thick steel plate and other spaced objects, pay attention to the diameter specification of the rubber hose. Pressure The dynamic working pressure of the general rubber hose refers to the general working pressure allowed by the rubber hose during continuous operation. According to the safety performance of the high-pressure hose required by the relevant national standards, the highly recommended pressure is generally one-fourth of the lower working pressure of the high-pressure hose.
Hydraulic oil pipe joint is a connecting part, it is a connecting joint between high pressure oil pipe and high pressure oil pipe. Different types of joints have different principles. Here, I will introduce the relevant principles of welded pipe joints. As the name suggests, welded pipe joints are obtained by welding, and a circular seal is used between the joint and the nozzle. The structure of the pipe joint is relatively simple, the production cost is not high, the production is relatively easy, and the sealing performance is good. However, the requirements for welding quality are very high, and it is inconvenient to install and disassemble. The cleaning of hydraulic oil pipe joints is divided into two types: kerosene cleaning and pickling. Kerosene cleaning is mainly for copper pipes and stainless steel pipes. First, remove the pipes and joints to be cleaned, use a cloth dipped in kerosene to clean the interior and observe the view, and then put Both ends and joints can be directly soaked in kerosene for cleaning. The standard after cleaning is that there should be no visible contamination. Pickling is mainly aimed at heavily corroded steel pipes. First, degrease, wash with water, then remove rust, and then neutralize with lye. Be careful not to wash away the marks on the pipes.
Related Products
Six Layers of Inner Peeling Glue 87693
Metric 24 Degree Taper Weight Series 20512-RW
Inquiry Now
QUICK CONTACT
T.: +86 15030876668 (Mr. Meng)
T.: +86 15833286698 (Mr. Liang)
F.: +86 0318-4506555
E-mail: xueqing@beiteer-joint.com
WhatsApp: +86 15030876668
Facebook: +86 15030876668
Add.: No. 337 Guangchuan Street, Jingxian West Development Zone, Hebei Province, China
