News

JIC Siamese Series

Adapter

High-pressure Hose

SAE Flange Light Series

JIC Male Thread

Company News

Industry News

Why are metal hoses so popular among users?

Metal hoses are pipe fittings for conveying various fluids and are the core components of corrugated pipes. It is mainly used to compensate the connection between pipes and pipes, pipes and equipment, and equipment and equipment. At present, metal hoses have been widely used in many complex piping systems, and the ability of metal hoses to reduce pipeline installation stress is an important factor in their popularity. In complex piping systems, installation is often difficult due to the limitations of space and location conditions. The formed pipeline cannot be installed, bent or straight, and the installed pipeline cannot be avoided. Local cold correction. Depending on the diameter of the pipeline and the specific conditions of the site, the amount of cold correction can vary from a few millimeters to tens of millimeters, and some can reach hundreds of millimeters. Practice has proved that the larger the amount, the higher the internal stress. The installation stress of these piping systems is undoubtedly a huge hidden danger. Since the metal hose can be bent arbitrarily, and when the rated bending radius is extremely small, the bending generates internal stress, which can bring great convenience to the installation work and affect the safe operation of the pipeline system. This is the main reason why some plumbing systems must use metal hoses. There are many kinds of metal hoses, and the classification methods are not the same. Some are classified by use, some are classified by raw materials, some are classified by button type, and so on. The following characteristics are the basis for the classification of metal hoses; the structure and manufacturing process of the bellows, the inner diameter of the hose, the working pressure value, the use and function of the working medium, the working conditions, and the requirements of the working temperature scale. According to different structures, bellows can be divided into the following types: steel brazing sealing bellows, welded sealing bellows, argon arc welding sealing bellows, and pipeline sealing bellows. According to the different working pressure, the hose is divided into low pressure, medium pressure and high pressure. Low pressure hoses are usually single-walled without reinforcement waves. When working under higher pressure, the strength of the metal hose can be improved by the following methods. A mesh sleeve is added to the second or third layer, and a spiral metal wire is added to the wave groove of the shell to increase the wall thickness of the wave to obtain a metal hose that works smoothly under medium and high pressure. According to their use, metal hoses can be divided into three basic types: hoses that carry corrosive and non-corrosive liquids and gases. Metal hoses are used to protect conductors in critical circuits, protecting them from mechanical damage and contact with liquids. Metal hoses are used as motion compensators to eliminate temperature deformation and equipment deformation for various equipment in hydraulic systems. Metal hose with mesh jacket for work under high pressure. Metal hoses used under long-term oscillating conditions with a wide range of excitation frequencies and limited flex. This metal hose requires long-term oscillation experiments at the operating frequency. According to the requirements of vibration intensity and vibration resistance, determine its working capacity.

29

2022

/

09

Why does the metal hose appear unstable?

Metal hose is a key component in the connection pipeline of contemporary mechanical equipment. Metal hose will also have problems in application. Let's talk about the solution to the imbalance of metal hose. When the metal hose is subjected to the work pressure that is worse than it can fulcrum, it will suddenly bend like a support prefabricated member or a cylindrical coil spring and lose the credibility of the linear system. If the pressure on the side of the vapor that the handicraft bears is also as high as the working pressure value on which it can pivot, it will also lead to imbalance. Most of the damage to honorary products on construction projects is caused by this cause and effect. Regardless of the plasticity of the metal hose, the pneumatic hydraulic seal, the compensator toward the expansion joint, and the metal hose, there are many difficulties. In other words, the work energy of the finished product under the working pressure on the gas generally depends on its reliability. The reliability of scientific research products can also be referred to the various Euler compression rod expressions! Metrological verification of its approaching load. In that way, as far as I know, the pressure load of the thing can be solved in a similar way by playing tricks. However, for the same result, due to the root of the following two aspects, the multiplication and division value is more than the actual value. 1. Due to the number of yards of the wave pattern, the production and processing of the thickness of the metal hose aggregate is not the same. Usually, the center line of the metal hose goes away from the symmetry axis of the true face of Lushan Mountain. In other words, there is essentially a small semi-circular arc in the heart line of the commodity. For metal hoses, the asymmetry of hand-woven plastic mesh bags and the inconsistency of each compressive strength also limit the bearing capacity of metal bellows. 2. Since the flexural rigidity value in the calculation of the pressure load formula of the metal hose is clear, the semi-circle of the water ripple (valley) of the product is regarded as the stiffness connection point of the pulse damper, and the metal hose itself is higher than Do not exceed the bending stiffness value.

29

2022

/

09

How should we ensure the safety of high-pressure hoses?

High-pressure hose is mainly divided into high-pressure steel wire braided oil pipe and high-pressure steel wire wound oil pipe according to the production process. Although there is a multi-layer structure and there are wire windings in it, we still need to pay more attention in use, not to damage the hose due to carelessness. Yingxian our work, so how to ensure the safety of high-pressure hose? During the loading and unloading process of the high-pressure hose, it should be lightly loaded and unloaded. If the product needs to be temporarily parked in the open air for some reason, the site must be flat, the hose should be neatly laid, and the bottom cover should be covered, and heavy objects should not be piled up; at the same time, the high-pressure hose should not be in contact with the heat source. Then this is very important. It is strictly forbidden to mix high-pressure hoses with acids, alkalis, oils, organic solvents, and inflammable and explosive materials; the high-pressure hose body should not be in direct contact with goods with sharp edges. Through the introduction of high-pressure hose manufacturers, I believe that everyone has a certain understanding of ensuring the safety of high-pressure hoses. Thank you for watching. If you have any questions about high-pressure hose equipment, you can contact our customer service staff or follow us. The website is updated, thank you again for your support.

29

2022

/

09

The quality of hydraulic pipes determines the safety of production

28

2022

/

09

What does the hydraulic hose marked 4sp-8-80 mean?

28

2022

/

09

Analysis of Common Faults of Hydraulic Hose

28

2022

/

09

< 1...383940...45 >