Welcome to the official website of Hebei Beiteer Hydraumatic Equipment Co., Ltd.
The following matters should be paid attention to in the application and design of the high-pressure braided hose
Upload Time:
2022-06-15
The bending radius of the high-pressure braided hose is not suitable for too small, generally not lower than the standard value in the technical characteristics of the high-pressure braided hose.
1. The bending radius of the high-pressure braided hose is not suitable for too small, generally not lower than the standard value in the technical characteristics of the high-pressure braided hose. There should be a straight section at the butt joint of the high-pressure braided hose and the tee joint, and the distance of this section should not be less than twice the diameter of the pipe.
2. The size of the total stroke of the high-pressure braided hose should be considered that after the high-pressure braided hose enters the working pressure oil, the length of the high-pressure braided hose will shrink and deform. Therefore, when the high-pressure braided hose is installed, it is not allowed to be in a tight situation.
3. The high-pressure braided hose must be installed to ensure that it does not change and deform. The center line of the connector of the high-pressure braided hose should be placed in the active plan as much as possible to avoid damage to the high-pressure braided hose when both sides are exercising with each other.
4. The high-pressure braided hose should avoid contact and friction with the position of the bevel on the mechanical equipment to prevent damage to the pipeline.
When it comes to high-pressure braided hose, I firmly believe that we all know that it has good airtightness, but do you know which aspects will cause harm to the airtightness of high-pressure braided hose? The wear resistance, high temperature and drought resistance of the high-pressure braided hose itself, as well as its resistance to ultraviolet light and active oxygen, will endanger the airtightness of the high-pressure braided hose. The selection of the sealing structure of the high-pressure braided hose and the generation of oil slick, working pressure, temperature, compatibility of raw materials, and the material, strength, geometric shape and surface smoothness of the surface layer in contact with the hydraulic seal are also harmful to the high-pressure braided hose. The main element of tightness.
Relevant News
QUICK CONTACT
T.: +86 15030876668 (Mr. Meng)
T.: +86 15833286698 (Mr. Liang)
F.: +86 0318-4506555
E-mail: xueqing@beiteer-joint.com
WhatsApp: +86 15030876668
Facebook: +86 15030876668
Add.: No. 337 Guangchuan Street, Jingxian West Development Zone, Hebei Province, China
