Welcome to the official website of Hebei Beiteer Hydraumatic Equipment Co., Ltd.
Flange and socket welding
Upload Time:
2022-06-15
The hydraulic hose joint can be welded by internal crimping electric welding. During electric welding, the protruding surfaces of the two products are relatively opposite, and the outer circumference of the vertical welding ring is welded firmly to reduce the welding deformation of electric welding.
The hydraulic hose joint can be welded by internal crimping electric welding. During electric welding, the protruding surfaces of the two products are relatively opposite, and the outer circumference of the vertical welding ring is welded firmly to reduce the welding deformation of electric welding. After the hydraulic hose joint is connected, post-weld production and processing are carried out on the flange raised surface and the outer circle to ensure the flatness and sealing properties of the raised surface.
The hydraulic hose joint of the exhaust pipe is composed of a flange, a hydraulic hose joint section and a drainage tube. As shown in Figure 1 below, the flanges on both sides of the hydraulic hose joint section are welded by electric welding, which is conducive to the connection of the hydraulic hose joint to the exhaust pipe system; one end of the drainage tube Electric welding is welded on the flange of the corrugated dry-type end, and the output end is displayed to prevent the high-temperature exhaust pipe from immediately impacting the inner surface of the corrugated pattern of the hydraulic hose joint and maintain the stability of the fluidity of the exhaust pipe.
Because the hydraulic hose joints are used in different parts, the hydraulic hose joints between cylinders and the hydraulic hose joints in front of the vortex must compensate for different offsets. Therefore, the hydraulic hose joints in the front of the vortex and the hydraulic hose joints between the cylinders are only different in length and main parameters.
Relevant News
QUICK CONTACT
T.: +86 15030876668 (Mr. Meng)
T.: +86 15833286698 (Mr. Liang)
F.: +86 0318-4506555
E-mail: xueqing@beiteer-joint.com
WhatsApp: +86 15030876668
Facebook: +86 15030876668
Add.: No. 337 Guangchuan Street, Jingxian West Development Zone, Hebei Province, China
