Welcome to the official website of Hebei Beiteer Hydraumatic Equipment Co., Ltd.
A brief introduction to the structure of SAE Flange Light Series
Upload Time:
2023-02-14
The simple structure of SAE Flange Light Series includes the following: 1. Hose joint 2. Oil port, flange head, flange pressure plate 3. O-ring, the flange head of the hose joint is pressed on the oil port by the flange pressure plate, When the bolt tightening torque increases, the bolts generate a large pre-tightening force, and the bolt pre-tightening force passes through the flange pressure plate, pressing the flange head tightly against the oil port, and the O-ring on the flange head is deformed due to compression ,
The simple structure of SAE Flange Light Series includes the following: 1. Hose joint 2. Oil port, flange head, flange pressure plate 3. O-ring, the flange head of the hose joint is pressed on the oil port by the flange pressure plate, When the bolt tightening torque increases, the bolts generate a large pre-tightening force, and the bolt pre-tightening force passes through the flange pressure plate, pressing the flange head tightly against the oil port, and the O-ring on the flange head is deformed due to compression ,
The end surface of the flange head of the hose joint and the oil port surface fully contact and generate pressure, which plays a sealing role. Due to the use of high-strength bolts, the pressure between the contact surfaces is very large, and the sealing effect is theoretically very good.
In the process of selecting hydraulic pipe joints, it is necessary to consider various factors such as the maximum working pressure of the joint, working temperature, interface size, applicable inner and outer diameter of the pipe, whether the installation is convenient, and whether it is economical. The maximum working pressure of the joint should not be lower than the maximum working pressure of the hose.
If you are interested in SAE Flange Light Series, please continue to pay attention to our company.
Relevant News
QUICK CONTACT
T.: +86 15030876668 (Mr. Meng)
T.: +86 15833286698 (Mr. Liang)
F.: +86 0318-4506555
E-mail: xueqing@beiteer-joint.com
WhatsApp: +86 15030876668
Facebook: +86 15030876668
Add.: No. 356, Jingkai Avenue, West Development Zone, Jingxian County, Hengshui City, Hebei Province, China
