Welcome to the official website of Hebei Beiteer Hydraumatic Equipment Co., Ltd.
quality JIC Male Thread supplier share thread detection system
Upload Time:
2022-12-08
1. Quality JIC Male Thread supplier——Hardware system: The thread parameter automatic detection system is based on PC architecture, mainly composed of lighting system, CCD camera and optical path imaging system, image acquisition card, image processing system, mechanical detection system and electronic control system, etc.
1. Quality JIC Male Thread supplier——Hardware system: The thread parameter automatic detection system is based on PC architecture, mainly composed of lighting system, CCD camera and optical path imaging system, image acquisition card, image processing system, mechanical detection system and electronic control system, etc.
quality JIC Male Thread supplier When measuring, after being illuminated by the lighting system, the thread image of the fastener is collected by the CCD camera and the optical path imaging system, and then the digital image is transmitted to the computer through the image acquisition card, and the computer performs the corresponding algorithm on the digital image After processing, calculate the parameters such as thread angle, pitch and pitch diameter, and compare with the standard to calculate the deviation.
2. Quality JIC Male Thread supplier——Software system: The software system for automatic detection of thread parameters mainly includes system control module, image processing module, etc.
quality JIC Male Thread supplier Analyze measurement results: Using machine vision technology, design an automatic detection system for thread parameter measurement, and measure parameters such as thread angle, pitch and pitch diameter of standard thread samples. The measurement results show that the thread parameters are within the specified error range.
quality JIC Male Thread supplier believes that on the section through the screw thread axis, the profile shape of the thread is called the tooth profile. The angle between two adjacent tooth flanks is called the tooth profile angle. The tooth profile of the commonly used common thread is triangular, and the profile angle is 60°.
Relevant News
QUICK CONTACT
T.: +86 15030876668 (Mr. Meng)
T.: +86 15833286698 (Mr. Liang)
F.: +86 0318-4506555
E-mail: xueqing@beiteer-joint.com
WhatsApp: +86 15030876668
Facebook: +86 15030876668
Add.: No. 356, Jingkai Avenue, West Development Zone, Jingxian County, Hengshui City, Hebei Province, China
