Welcome to the official website of Hebei Beiteer Hydraumatic Equipment Co., Ltd.
Introduction of common methods for connecting hydraulic hoses and hoses
Upload Time:
2022-09-26
Many people will match with other equipment after buying hydraulic hose joints, so how to ensure the seal between the hydraulic hose and the hose, let's take a brief look:
1. The sealing method of hydraulic hose joint and hose connection - the inner and outer threads of the quick connector can only be connected with the hose after using a transition joint or an adapter.
2. The connection and sealing method of hydraulic hose joints and hoses - no matter there are many kinds of hose joints, it is necessary to choose which transition joints to use according to the types of hose joints. If the hose is an ordinary water pipe, it should use a transition joint, one end of the inner tooth, one end of the water pipe, and then fixed with a throat hoop. If the two ends of the hose are internal teeth, it should be used with the transition joint, one internal tooth and one external tooth. If the two ends of the hose are external teeth, it should be connected with the transition joint, and the internal teeth will be straight.
3. Sealing method for connecting hydraulic hose joints and hoses - general hydraulic quick-change joints are required to withstand high pressure. Therefore, in most cases, high-pressure oil pipes are used. You can take it directly.
4. Sealing method for connecting hydraulic hose joints and hoses - As for hydraulic joints, no other rubber rings are used to seal, and the product itself is concave at one end and convex at the other end, and can be completely sealed after connection.
Relevant News
QUICK CONTACT
T.: +86 15030876668 (Mr. Meng)
T.: +86 15833286698 (Mr. Liang)
F.: +86 0318-4506555
E-mail: xueqing@beiteer-joint.com
WhatsApp: +86 15030876668
Facebook: +86 15030876668
Add.: No. 356, Jingkai Avenue, West Development Zone, Jingxian County, Hengshui City, Hebei Province, China
