Welcome to the official website of Hebei Beiteer Hydraumatic Equipment Co., Ltd.
Six situations for correct installation of high and low pressure hose assemblies
Upload Time:
2022-09-23
The high and low pressure hose assembly is not like a hose, it cannot be applied in time, and it needs to be installed accordingly. When it comes to installation, it is necessary to remind everyone that the correct method must be used when installing the high and low pressure hose assembly. It should be known that many reasons for failure at work are caused by incorrect installation.
Here are six ways to correctly install the high and low pressure hose assembly:
1. When installing the high-pressure hose, do not twist the high-pressure hose.
2. When the bending radius of the high-pressure hose is too small, remember to use a right-angle joint to avoid sharp bending and twisting of the high-pressure hose.
3. When the high-pressure hose is under pressure, the length of the high-pressure hose will change, and the general product is somewhat inaccurate, so lengthening and shortening cannot be avoided. If the high-pressure hose is installed, there is a bend. No fixtures should be added to the bend of the high pressure hose. The high pressure hose should be free to move. Once it is fixed, it is easy to cause the wear of the crimping part to increase.
4. In order to avoid the high pressure hose being damaged and the flow being restricted, the bending radius of the high pressure hose should be increased as much as possible.
5. When installing the high-pressure hose, remember not to twist the high-pressure hose, otherwise it is easy to damage the high-pressure hose or loosen the crimped joint when it is under pressure.
6. When installing the high-pressure hose between objects, a certain space should be reserved to avoid friction between the high-pressure hose and the object during operation. If you can't avoid it, try to get some protection. Such as high pressure hose sheath.
The above six correct installation methods I hope everyone should remember to avoid the failure of the high and low pressure hose assembly during work and cause unnecessary trouble.
Relevant News
QUICK CONTACT
T.: +86 15030876668 (Mr. Meng)
T.: +86 15833286698 (Mr. Liang)
F.: +86 0318-4506555
E-mail: xueqing@beiteer-joint.com
WhatsApp: +86 15030876668
Facebook: +86 15030876668
Add.: No. 356, Jingkai Avenue, West Development Zone, Jingxian County, Hengshui City, Hebei Province, China
